The Spektrum trademark is used with permission
of Bachmann Industries, Inc.
3
Hangar 9 P-51 PTS Mk II Assembly Manual
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed
next to each step to keep track of each step completed.
Steps with a single box (
) are performed once, while steps
with two boxes (
) indicate that the step will require
repeating, such as for a right or left wing panel, two servos,
etc. Remember to take your time and follow the directions.
You will also find an included instructional DVD that will
guide you through the preparation of your model and
compliments this manual. It is recommended to watch
the instructional DVD before beginning the assembly of
your model.
UltraCote® Covering Colors
• Black
HANU874
• White
HANU870
• Silver
HANU881
• Cub Yellow
HANU884
• True Red
HANU866
• Olive Drab
HANU904
Before Starting Assembly
Before beginning the assembly of your P-51 PTS Mustang,
remove each part from its bag for inspection. Closely inspect
the fuselage, wing panels, rudder and stabilizer for damage.
If you find any damaged or missing parts, contact the place
of purchase.
If you find any wrinkles in the covering, use a heat gun or
covering iron to remove them. Use caution while working
around areas where the colors overlap to prevent separating
the colors.
HAN100 – Heat Gun
HAN150 – Covering Glove
HAN101 – Sealing Iron
HAN141 – Sealing Iron
Sock
Radio and Power
Systems Requirements
Spektrum Radio System
• DX6i (included)
• SPM6600 DX6i 6-Channel w/o Servos MD2
• SPM66001 DX6i 6-Channel w/o Servos MD1
Power System
• Evolution Trainer Power System (EVOE100)
Red spinner available separately (included)
Optional for Flap System
• JR SPORT ST-47 Standard Servo (JSP20050) (2)
• Y-Harness, Heavy Duty (JRPA135)
Field Equipment Required
• Fuel (15% recommended)
• Propeller (EVOE100P) included
• Long Reach Glow Plug Wrench (HAN2510)
• Metered Glow Driver w/Ni-Cd & Charger (HAN7101)
• 2-Cycle Sport Plug (EVOGP1)
• Manual Fuel Pump (HAN118)
Optional Field Equipment
• Selfstick weights, 6 oz (HAN3626)
• PowerPro 12V Starter (HAN161)
• 12V 7Ah Sealed Battery (HAN102)
• Power Panel (HAN106)
• Blue Block After Run Oil (EVOX1000)
• Cleaner and towels
Additional Required
Tools and Adhesives
• Phillips screwdriver: #1, #2 • Pencil
• Felt-tipped pen
• Box wrench: 7/16-inch
• Flat blade screwdriver
• Nut driver: 7/32-inch
• Hex wrench: 3/32
-inch, 2.5mm
Optional Tools and Adhesives
for Flap Installation
• Pencil
• 6-minute epoxy
• Drill
• Sandpaper
• Phillips screwdriver: #1
• Thin CA
• Mixing cups
• Mixing sticks
• Hobby knife w/#11 blade
• Side cutters
• Drill bit: 1/16-inch (1.5mm)
FS One
With FS One (HANS2008) you get more than photorealistic
fields, gorgeous skies and realistic-looking aircraft. You get
incredibly advanced aerodynamic modeling that simulates
every possible aspect of real-world flight.
The first Hangar Pack (HANS4010) will add even more
aircraft to FS One. This latest edition includes ten new planes
and helis from your favorite brands, including Hangar 9,
E-flite and Align. You’ll be able to fly aircraft that are only
available on FS One such as the T-REX, Blade CX2, Blade CP
Pro, Hangar 9 P-51 and F-22 PTS. And as always, with the
Hangar Pack, you still get all the same great features that
you did with the original aircraft.
HANS2008 HANS4010
Important Information
Regarding Warranty Information
Please read our Warranty and Liability Limitations section on
Page 32 before building this product. If you as the purchaser
or user are not prepared to accept the liability associated
with the use of this Product, you are advised to return this
Product immediately in new and unused condition to the
place of purchase.
