Section 11: Fuel Tank Assembly
29
Step 2
Locate the rubber stopper. Insert the shorter metal
fuel tube into one of the holes in the stopper so that
an equal amount of tube extends from each side of
the stopper. This tube will be the fuel tank pickup that
provides fuel to the engine.
Step 3
Slide the smaller cap over the tube on the smaller
end of the rubber stopper. This end will be inserted
into the fuel tank. The larger cap is placed on the
side of the rubber stopper that makes the cap.
Loosely install the M3 x 20 screw through the
center of the stopper.
Step 4
Bend the longer fuel tube carefully to a
45-degree angle using your fingers. This will
be the fuel tank vent tube. Use care not to kink
the tube while bending.
Step 5
Slide the vent tube into one of the remaining two
holes in the stopper from the tank (small cap) side.
