4
Warning
Additional Required Tools and Adhesives
Tools
• Adjustable wrench
• Canopy Scissors (DYN2517)
• Drill
• Drill Bit: 1/16”, 5/64", 3/32”, 9/64",
5/32", 1/8”, 7/32”
• Foam: 1/2”
• Hex Wrench: 3/16", 9/64" (BON10945 - Set)
• Hobby Knife (XAC3126)
• Phillips screwdriver (small)
• Pliers
• Square (MID1123)
• 11/32" socket wrench
Adhesives
• 6-Minute Epoxy (HAN8000)
• 30-Minute Epoxy (HAN8002)
• Thin CA (cyanoacrylate) Glue (PAAPT08)
• Thick CA (cyanoacrylate) Glue (PAAPT02)
• CA Remover/Debonder (PAAPT16)
• Pacer Z-42 Threadlock (PAAPT42)
• RCZ56 Canopy Glue (ZINJ5007)
• Masking Tape (MMM20901)
Other Required Items
• Epoxy Brushes (DUB345)
• Felt-Tipped Pen (PAR10400)
• File
• Fuel Tubing (AER1003)
• Measuring device (e.g. ruler, tape measure)
• Mixing Sticks for Epoxy (DUB346)
• Paper towels
• Petroleum jelly
• Rubbing alcohol
• Sanding bar
• Sandpaper (medium)
• String
• T-Pins (DUB252)
• Wax paper
An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open
areas, preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included
with your radio and engine.
Other Items Needed (not included in the kit)
• Propeller
14x8 - Saito, 12x6 or 13x6 - Evolution
• Safety spinner for engine
HIGSPN008 - Saito, HIGSPN014 - Evolution
• 537 Standard Servo (JRPS537) (5) or equivalent
• 703 Low–Profile Retract Servo (JRPS703)
• Large servo Arm w/Screw (JRPA212)
• 9" Servo Lead Extension (JRPA097) (2)
• 12" Servo Lead Extension (JRPA098) (2)