35
Special considerations for
DA-50 Installation:
Fuel Tank Orientation
Because of the location of the throttle linkage, the
tank will be mounted on its side. Make sure the vent
line is facing the correct direction in relationship to
the fuel tank. It is helpful to slide a piece of Tygon
tube onto the vent to extend it to the top of the tank.
Fuel Tubing
When using gas engines, Tygon fuel tubing must be
used. The supplied tubing is for glow enine use only.
Stopper Assembly
When preparing the stopper assembly, apply a drop
of solder to the ends of the brass tubing where the
fuel lines attach.
������������
������������
Securing the Fuel Tubing
Wire ties must be used to secure the fuel lines to the
tubing, If these precautions are not done, the fuel
lines will slide off the brass tubing.