Operation
Hang OM
Automatic eyeletting machine 102-50
17
6.4.3 Switching off
Wait until the eyeletting machine has completed the operating cycle.
Set the toggle switch [7/6.2.1] to "OFF".
“
Switching off" as described above is sufficient for breaks, the end of the
working day, weekends, and interruptions of work lasting up to a week.
Pull the mains plug out of the mains outlet in the event of longer work
interruptions.
6.4.4 In case of emergency
Press the toggle switch [7/6.2.1] (e.g. in an "emergency stop situation" or
during set-up).
The motor remains in an indefinite position.
Press the pushbutton before starting work after set-up or fault removal.
The eyeletting machine moves to its home position.
6.5 Changing the riveting pressure
Test the eye punch (as you would when
“
Introducing eyelets
”
).
If the pressure exerted by the punch is too high or too low, it will need to be
recalibrated.
Danger from operational eyeletting machine.
Risk of hand injuries.
Set the toggle switch to "OFF
”
before commencing work.
Secure the eyeletting machine against restarting
(e.g. remove the mains plug).