23
HandyTrac Touch
User Guide
Using Building Pull
(Buildings must be programmed in the system to use Building Pull)
1. Log in to the Handytrac system and
select the Building Pull icon.
2. Select the Activity that will be
performed for the Building Pull.
3. Select a building from the list. The
cabinet door will open and direct you to
the first available key in the building.
4. Remove the key for the unit and
scan
the key out
. Once a key is scanned, the
system will automatically provide the
next key in the building. Continue pulling
and scanning each unit until the building
pull is complete.
Notes:
• If a key is not in the cabinet, tap “Cancel” to skip to the next unit and continue the
Building Pull.
• If a key is already out, the unit will be skipped.
