3
PARTS REQUIRED:
DOORS
Center doors on over door trim at center mark as shown
(Fig. B)
.
4
Check door hinge board is flush to over-door trim.
Remove temporary supports and check doors open properly.
6
Screw hinge boards into wall studs and floor using 2" screws as shown.
Make sure screws go into framing and floor
(Fig. C, D)
.
5
2" (5,1 cm)
Screws into the wall
support and floor frame.
Fig. C
3/8"
(1 cm)
Fig. B
Fig. D
Angle 2" (5,1 cm)
Screw
Attach temporary support
OO
as a ledger board 72" down from bottom of over door trim
(Fig. A)
.
Doors will rest on
OO (Fig. A)
. Secure
OO
using two 3" screws.
MARK
72" from over
door trim
Fig. A
72" (182,9 cm
from bottom
of over door
trim to top of
ledger board
(OO).
MARK CENTER
3" (7,6 cm)
x2
x10
2" (5,1 cm)
OO
25
(2) 3" (7,6cm)
Screws
Hinge
Board
Hinge
Board
Over Door
Trim
TEMPORARY SUPPORT
OO
x1
1-1/4 x 2-1/2 x 69" (3,2 x 7,6 x 175,3 cm)
OO
Flush
Flush