manualshive.com logo in svg

H&S Mini Maxx, Installation Manual

Share
Download
H&S Mini Maxx Installation Manual Download Page 42

42        Mini Maxx Installation Manual   •   www.hsperformance.com

2003 - 2007 6.0l fOrD POWErSTrOKE

Power levels

Power Levels can be adjusted on-the-fly at the touch of a but-
ton after Installing the Download to the vehicle. The current 
Power Level will be saved even if the Mini Maxx is unplugged.

nOTE: 

The Power Level ratings listed may not be exact for your particular 

vehicle. The listed ratings apply to the out-of-the-box tuning that H&S tuning 
devices are shipped with. Any custom downloads may result in different rat-
ings and can be found at www.hsperformance.com/mini-maxx-downloads.

Egr Delete

With H&S tuning installed, the EGR system on the 6.0L Powerstroke can be completely 
removed with an EGR Delete Kit while remaining code free.

Speed limiter

This option allows for the removal of the factory speed limiter. Most 6.0L Powerstroke trucks 
have a 95 MPH speed limiter from the factory. The limiter can be removed completely or left 
stock

 (this may change so be sure to visit www.hsperformance.com for product updates)

. This option can 

only be changed during the Install Download process.

Tire Size calibration

(Not currently available for the 2003 - 2007 6.0L Powerstroke. This may change so be sure to visit www.
hsperformance.com for product updates)

 This option allows for the re-calibration of the factory 

speedometer to adjust for non-stock sized tires. For the most accurate speedometer reading 
when using non-stock sized tires, it is best to measure the diameter of the tire using a tape 
measure rather than going by the printed tire size. In addition, using a GPS is a great way to 
dial in your factory speedometer.  Entering a larger tire size will cause the factory speedom-
eter to read higher while entering a smaller tire size will cause the factory speedometer to 
read lower. This option can only be adjusted during the Install Download process.

Power LeveLs

No Power

  . . . . . . . . . . . . .

0 HP

Mild

  . . . . . . . . . . . . . . . . . . .

40 HP

Wild

  . . . . . . . . . . . . . . . . . . .

80 HP

Hot

  . . . . . . . . . . . . . . . . . .

 120 HP

video in Motion

This feature will allow customers with a factory installed Chrysler 730N DVD/Navigation unit 
to unlock all features that are normally blocked while driving. Full destination input into 
the navigation system is now available, even while the vehicle is moving, as well as DVD 
playback on the front screen. May require additional unlock fee. For more info see  
www.hsperformance.com/store/dodge-video-in-motion-unlock-code.html

2010 - 2012 6.7L Dodge Cummins Specific Features Continued >>

Summary of Contents for Mini Maxx































































Reviews:

No comments

Brands by name

Popular brands

Load more brands