14 Mini Maxx Installation Manual • www.hsperformance.com
SEcTiOn 3:
OBDii aDaPTEr PlUg
This step involves locating the vehicle’s OBD ll port and
then simply plugging the OBD ll Adapter Plug into the
OBD ll port.
1. As the illustration below shows, OBD ll ports
are always located somewhere under the driv-
ers side dash. The OBD ll port is a male receiver
that will have the same shape as the end of the
OBD ll Adaptor plug.
2. Once the OBD ll port is located, then simply
plug the OBD ll Adaptor plug into the OBD ll
port.
OBDii aDaPTEr PlUg DiagraM
1.
OBD ll Male end:
this is the part of the adapter plug that plugs into the vehicle OBD ll port.
2.
Main harness port:
the main harness will plug into the Mini Maxx and into this port during installation.
3.
Power wire port:
the power wire will run from this port to the vehicle fuse box during installation.
Plug into the Mini Maxx and into this port during installation.
4.
Power supply switch:
use this switch to change power from running off of the Power Wire to OBD ll
power as a power supply for the Mini Maxx.
5.
four pin usb:
This port is used if an H&S pyrometer kit is purchased for the Mini Maxx.
6.
five pin usb
7.
adapter plug fuse
Possible OBDII Port Locations
(
location may vary
)
1
5
6
7
2
3
4
note:
On some vehicles it is recommended to move the OBDII port to a safer location. Because the Mini Maxx will
remain plugged in, the adapter can be kicked/bumped and broken. Please move your OBDII connection to a safer
location if you feel it is in a position that may allow it to get damaged.
Summary of Contents for Mini Maxx
Page 52: ...52 Mini Maxx Installation Manual www hsperformance com...
Page 62: ......
