H&S HD, Operator'S Manual / Parts Book

Page: 42 / 54

Mounting Socket for SMV Emblem (A)
Red Reflective Tape (B)
WHEN TRANSPORTING ON THE
HIGHWAY OR ROADS, PLACE SMV
SIGN IN SOCKET PROVIDED AND
REGULARLY CLEAN THE REFLECTIVE
TAPE AT THE REAR OF THE FORAGE
BOX.
NOTE: Obey all state and local laws,
concerning towed equipment, on public
roads.
For light information (See Page 23)
-13-
MAIN FEEDER APRON ADJUSTMENT
Main feeder apron adjustment bolts are located behind the convenient access door located in the bottom
portion of rear tailgate. Remove handle nuts (A) to open access door and swing door downward.
All apron chains must be taken up evenly before you use the forage box. Check again after the first few
loads. The Main Feeder Aprons should be at proper tension at all times. Tighten the full threaded bolts (B)
to adjust aprons. Aprons are properly adjusted when two Cross Slats, or about three feet of chain lift off the
Chain Return Slides from the rear of the box. Maintain this tension when operating the box.
A
B
B
A
- 40 -
FIGURE 6