3. Cradle Shifting Valve:
The cradle shifting valve mechanism has been adjusted at the factory and should not
require adjustment during normal use of the machine. If, however, the valve or other
components need to be serviced, the following guideline should be used to position the
valve properly on its mounting plate:
a. Assemble the shift spool to the valve body.
b. Position valve on the mounting plate and install mounting bolts. Tighten bolts finger
tight to allow moving if required.
c. Slide the valve spool to its neutral position (5/16" extended).
d. Slide the valve assembly until it is centered between stops. Tighten mounting bolts
to their specified torque.
e. Adjust the stop bolt so that when the valve shift lever is touching the stop bolt there
is approximately 1/32 inch clearance between the shift spool flange and the stop
welded to the valve plate.
f. Move the shift lever to the other side and adjust the other stop bolt in the same
manner.
g. Check that the shifting action is smooth and that no binding occurs.
h. Install spring and reconnect hoses.
4. Flail Backslap:
Regardless of the type of bale, persistent hammer backslap is detrimental to
Bale
Processor
operation. Hammer backslap at start-up is normal and disappears once the
rotor is up
to speed. If your
Bale Processor
experiences frequent hammer backslap,
the cause should
be investigated and rectified. In most cases reducing the cradle
speed will correct the
problem.
- 33 -
- 5.6 -
L
R
NOV 2016
VK
Summary of Contents for 2958
