H&S 2958, Operator'S & Parts Manual

Page: 29 / 76

2. Cradle Tilt System:
The Processor is designed with a cradle inside the frame that tilts or rocks from side
to side and moves the bale across the flails/rotor to prevent bridging. It is a simple
self-actuating system that is adjustable for speed and stroke to accommodate any type
of bale or material.
a. Speed:
A system is designed with a standard flow divider to change and set the system speed.
Set at 5 for maximum speed. Move toward 0 to decrease the speed. Normally it should
take 10 to 12 seconds to complete one cycle of the cradle.
b. Stroke:
Use the sliding brackets on the cradle frame to set the range of the stroke.
- 4.6 -
L R
NOV 2016
VK