GB
94
H26T High/H26K High
Installing the baking oven (accessory)
TILE
Upper front
profile
TILE
Front stone
Place the sealing ring so that
it is centered over the hole on
the top of the insert. Press the
aluminium hoses into the back
corners so that they are not in the
way of the baking oven.
If connecting upwards,
move the pre-assembled
lid on the baking oven
top to the back.
Remove the connector from
the top of the insert and secure
it onto the back or top of the
oven, depending on whether the
chimney is to be connected from
the rear or directly upwards.
Hang the stone into place in
the keyholes and allow it to
rest against the bent edge
of the side profile. Check
that it is at the same height
as the side stones and then
tighten the screws.
Secure screws into the
front stone leaving 4-5 mm
between the screw flange
and the soapstone.
Securely screw the
corner profiles that are
packed together with
the baking oven into the
upper side stones.
Press the profile
upwards so that its bent
edge is against the lower
edge of the side stone.
1
2
3
4
5
