GB
85
TILE
Middle side stone
TILE
Lower front
stone
H26T Low/H26K Low
Check that the
type plates are in
place.
Hang the middle side
stones into place using
the keyholes in the side
profiles. Then tighten the
screw that is holding the
front side profile in the
insert.
Hook the front side profile onto the
lower side stone’s suspension plate and
secure its upper edge with screws in
both the insert and side profile. Do not
tighten the screw in the insert until the
second layer of side stones are in place.
Install the two, lower front profiles on the lower
front stone so that they are edge to edge with the
short sides of the stone. Insert the front stone
between the lower side stones so that they are
locked into place by the front stone’s profiles.
