GB
87
H26T Low/H26K Low
TILE
Top stone
Damper
The top grate damper is regulated using the
control on the top. When the damper is open,
the heated air flows into the room and spreads
the heat. When the damper is closed, a greater
amount of heat is stored in the soapstone, which
releases the heat more slowly and over a longer
period.
Apply a few small drops
of silicone beneath the
tile top to hold it in place.
Carefully place the grate so that it rests on the
pins or the cast edge of the tile top. Check that
the damper can be opened and closed properly.
Position the top stones on top of
the stove. Pins are placed in the
soapstone top for the grate to
rest on.
Position the adjusting screws on the top of the
back plate and screw them down so that the screw
heads are level with the top surface of the upper
side stones.
Screw the convection box securely into the upper
front profiles. Then connect the aluminium hoses
to the convection box.
Place the base plate of the heat tank on the top of the insert. Then place the tank stones as illustrated and push the aluminium
hoses through the holes in the tank stone and down into the convection pipes on the top of the insert. Handle the hoses with care to
ensure they do not crack.
