Handlink Technologies WG-500P M User Manual Download Page 72

Page: 72 / 156

‐

500P

‐

500P

Hotspot

Printer

Item

Default

Description

LAN

IP Address

10.59.1.1

The internal LAN IP address of your WG-500P.

Subnet Mask

255.255.255.0

Enter the subnet mask for the IP address.

WAN MAC Address

IP Address

The default MAC address is set to the WAN physical interface on device.

DHCP Client

The device can work as a DHCP client. This allows the device to obtain the IP address

and other TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature,

please enable Use DHCP Client.

Static IP

IP Address

Enter the IP address for the xDSL/Cable connection (provided by your ISP).

Subnet Mask

Enter the subnet mask for the IP address.

Gateway IP Gateway

Enter the Gateway IP address for the xDSL/Cable connection (provided by your ISP).

Primary DNS Server

A primary DNS server IP address for the xDSL/Cable connection (provided by your ISP).

Secondary DNS

Server

A secondary DNS server IP address for the xDSL/Cable connection (provided by your

ISP). If the primary DNS Server IP were not available, meanwhile, Secondary DNS Server

IP would start in the same time.

PPPoE

User Name

Empty

Enter your PPPoE account name. The user name can consist of up to

80 alphanumeric characters and is case sensitive.

Password

Empty

Enter your PPPoE password. The password can consist of up to 80

alphanumeric characters and is case sensitive.

PPP MTU Setting

1492

MTU (Maximum Transfer Unit) specifies maximum transmission unit

size.

TCP MSS Setting

1452

MSS (Maximum Segment Size) specifies maximum segment size.

Service Name

Empty

Enter the service name provided by your ISP. The service name can

consist of up to 64 alphanumeric characters and is case sensitive.

Connect on Demand

Enable

You can configure your WG-500P to cut your connection with your ISP

after a specified period of time (Max Idle Time). If you have been

disconnected due to inactivity, Connect on Demand enables your

WG-500P to automatically re-establish your connection as soon as you

attempt to access the Internet again. If you wish to activate Connect on

Demand, click the radio button. If you want your Internet connection to

remain, click the radio button of keep alive. The Max Idle Time

maximum value is 65535 minutes.

Max Idle Time

10 Minutes

Keep alive

Disable

This option keeps your PPPoE enabled Internet access connected

Summary of Contents for WG-500P M





























































































































































Search results

Summary of Contents for WG-500P M

Reviews:

Related manuals for WG-500P M

Brands by name

Popular brands

Handlink Technologies WG-500P M, User Manual

Search results

Summary of Contents for WG-500P M

Reviews:

Related manuals for WG-500P M

Brands by name

Popular brands