WG
‐
500P
&
WG
‐
500P
M
Hotspot
in
a
Printer
74
Item
Default
Description
DHCP Server—Enable DHCP server function.
DHCP Relay
To route DHCP through an external server, the administrator needs to enable the
DHCP relay and assign a valid DHCP server IP address.
DHCP Server IP Address
Empty
Enter the IP address of DHCP server.
DHCP Server
The WG-500P's DHCP server is turned on and running by default when you install it in
your network.
DHCP Pool Starting
Address
10.59.1.2
Enter the DHCP Pool Starting IP address.
Pool Size
253
The DHCP pool size range is 1 to 512.
Lease Time
300
Minutes
The DHCP lease time. The DHCP lease time range is 1 to 71582788
minutes.
Primary DNS Server
168.95.1.1
Enter the IP address of the network’s primary DNS server.
Secondary DNS Server
Empty
Enter the IP address of a second DNS server on the network.
Email Server Redirect
To prevent some subscriber’s original Email server may protect by firewall or NAT
network. WG-500P provides an extra Email server parameter to forward the
subscriber’s Email. The WG-500P not only forwards the subscribers’ E-mail via other
E-mail server but also changes the SMTP header. The recipient of your E-mail sees
the message as if you sent it from your local Internet Service Provide, not form the
hotel or other place.
Note: Before setting this sever, please make sure the e-mail sever relay function is
opened. It must not exceed 50 characters.
IP Address or Domain
Name
Empty
Enter the E-mail server IP address or domain name.
SMTP Port
25
Enter the SMTP port number for mail server. The SMTP port allowed
range is 25 or 2500 to 2599.
Click
Apply
button
to
save
the
new
settings.
