background image

 

 

 
 
 
 

Warranty 

 
 
Equipment manufactured by H&K Ltd is guaranteed for a period of one year 
from date of purchase. H&K Ltd warranty terms covers labour charges and 
replacement of defective parts within this period. Claims for defective 
equipment will be accepted if the defect is a result of manufacturing error or of 
a part’s non-compliance. H&K Ltd does not accept responsibility for defects 
caused by the mishandling, abuse or neglect of equipment. Parts replaced 
after the one-year period has elapsed are covered under warranty for 90 days. 
 

 

Purchase record 

 

 

This information should be entered upon receipt of Filet Freezer/Chiller 

 

 

Filet 1 

 

Date installed…………………………………… 

 

H&K Ltd quality number……………………….. 

 

H&K Ltd electrical number…………………….. 

 

 

Filet 2 

 

Date installed…………………………………… 

 

H&K Ltd quality number………………………. 

 

H&K Ltd electrical number……………………. 

 

 

Filet 3 

 

Date installed…………………………………… 

 

H&K Ltd quality number………………………. 

 

H&K Ltd electrical number……………………. 

 

 

These numbers are to the left of the condenser fins – access through the top 

access panel (see picture on page 13) 

Please quote them in any relevant correspondence

 

 

Issue 1:1 31.10.2002  

5

 

Summary of Contents for 804048V














Reviews: