Maintenance
Version 2015v1
10
2.3.2
Replacing the 12” rear wheel
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
•
Support the wheelchair in such a way that the wheel is
elevated.
•
Remove locking nut (A) with a 12 mm box spanner.
•
Pull wheel (B) off the axle (C).
•
Remove the tyres; see ‘Repairing the tyre of the drive
wheel’ or ‘Replacing the tyre of the drive wheel’.
Fit the new wheel in the reverse order.
2.3.3
Replacing the 16” rear wheel (option)
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
•
Support the wheelchair in such a way that the wheel is
elevated.
•
Remove locking nut (A) with a 17 mm box spanner.
•
Pull wheel (B) off the axle (C).
•
Remove the tyres; see ‘Repairing the tyre of the drive
wheel’ or ‘Replacing the tyre of the drive wheel’.
Fit the new wheel in the reverse order.
2.3.4
Replacing the rear wheel of Ibis with
PowerSupport (option)
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
•
Support the wheelchair in such a way that the wheel is
elevated.
•
Remove nut (A) with a 19 mm open-ended spanner.
•
Remove wheel (B).
•
Remove the tyres; see ‘Repairing the tyre of the drive
wheel’ or ‘Replacing the tyre of the drive wheel’.
Fit the new wheel in the reverse order.
A
B
C
A
B
C
A
B
