C1000
- User Guide (636155)
Rev: 04 Nov 2019
Page: 15
Basics in transferring an individual … continued
Caution: Prior to removing the straps of the sling from the carry bar be sure to check that
the individual being lifted is securely supported in the final desired position.
Step 8)
Lower the car r y bar sufficiently to allow the str aps of the sling to be easily r emoved fr om the
carry bar. Take care not to let the carry bar come in contact with the individual in the sling. The straps from the
sling can now be removed from the carry bar. The carry bar of the lift should then be raised sufficiently and
the lift moved away from the immediate area so that it will not interfere with the removal of the sling from the
individual.
Step 7)
Once at the desir ed location the individual in the sling can be lower ed/r aised to the cor r ect
height in order to complete the transfer. On completion of lowering/raising ensure that the individual is proper-
ly positioned and safely supported prior to removing the straps of the lift from the carry bar.
Step 6)
Once at the corr ect height the individual can be moved along the tr ack to the desired location.
Refer to the sections already described in this manual on how to move the lift along the track
Step 10)
The lift can now be moved to a safe location until fur ther use, or r elocated to its' or iginal loca-
tion. The lift should be turned off when not in use. It is recommended that the lift be left on charge when not
in operation. Refer to the section titled, “
Charging the lift
” for instructions on charging.
Step 9 )
The sling can now be gently r emoved fr om the individual. It should then be stor ed in a safe
place for future use.
Optional Hand Control Hook
Your lift has come with an optional Hand Control Hook. This Hand Control Hook can be installed onto the
Hand Control using the self tapping screws provided with the plastic hook. On the back of the Hand Control
there will be 2 small pilot holes where the self tapping screws should be screwed into. See figure 9A for a
Hand Control with the Plastic Hook already assembled. Figure 9B demonstrates the use of the plastic hook
with your lift.
Figure 9A - Hand Control with Hook
Figure 9B - Suggested use
Step 5)
The individual may now be r aised with the use of the UP button on the hand contr ol. While lift-
ing is in progress the height required in order for the transfer to be completed safely should be closely ob-
served. Ensure that the individual being lifted will not be injured by any obstructions during the initial lifting.
Caution: Always use caution when lowering/raising an individual who is in the sling of the
lift. Watch out for and avoid any obstructions that may cause injury to the individual, or dam-
age to the lift.
