HQ Little Foot Frame Assembly Instructions
| 7
December, 2019
11. Align the holes in one of the
L-brackets over the leg holes on
the long side of the table, replace
the screws, and tighten. Repeat
steps 10 and 11 with the other
front upper leg.
Side Arm and Pole Assembly
Parts Needed
2 – Side arms
14 – M6 x 10mm socket cap screws
2 – L-brackets
1 – Left pole end assembly
1 – Right pole end assembly
2 – Side arm poles
2 – Front pole corner connectors
2 – Rear pole endcaps
1 – Rear pole
1 – Front pole
Tools Required
5 mm hex tool (provided)
4 mm hex tool (provided)
17/13 mm wrench (provided)
1. Attach the right and left side arms:
Use the 5 mm hex tool to remove
the screws from the side of the
right upper leg. Using the top row
of holes on the side arm, place a
screw in the leftmost large hole
in the left side arm and align with
the leftmost hole in the upper leg.
Patially tighten the screw for now
to secure to the side of the frame.
Repeat with the other large hole.
NOTE
: Note the orientation of the side arms in the figure
above. The vertical metal extension (circled) is positioned
toward the back of the frame.
