6 |
www.HandiQuilter.com
December, 2019
8. Set the frame height: Decide
on the preferred height of the
frame. Use the image at the right.
identify which height adjustment
holes to use for securing the
lower legs.
Place an M8 x 20mm SBHCS with a
nylon washer into the same height
setting on each of the corner
legs. (The nylon washer protects
the paint in case you change the
height setting later.) Fully tighten
the screw on each leg with the
5 mm hex tool.
NOTE
: Adjust the frame height
so that when standing at the
front of the machine with your
hands on the front handle
bars, your elbows are bent at a
90-degree angle.
33
”
- 34
”
FLOOR TO QUILT PLANE
34
”
- 36
”
FLOOR TO QUILT PLANE
36
”
- 38
”
FLOOR TO QUILT PLANE
38
”
- 40
”
FLOOR TO QUILT PLANE
41
”
- 42
”
FLOOR TO QUILT PLANE
42
”
- 44
”
FLOOR TO QUILT PLANE
9. Stand the frame upright:
With the
help of a second person, lift the
frame into an upright position.
10. Attach L-brackets: With the 5 mm
hex tool, loosen and then remove
the screws from the front of an
upper leg. (See the detail in the
next figure.)
Front of
Frame
Front of
Frame
