HandHeld Image Kiosk 8560 User Manual Download Page 13 | Manualshive

Page: 13 / 72

HandHeld Image Kiosk 8560 User Manual Download Page 13

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft

3 - 1

3

Hardware Overview

Front Panel

This section describes features on the front panel of the IK8560 device.

Touch Screen Display

Illumination Cone

Reset Switch

This switch performs a cold boot without removing power from the unit. For details, see

Using the Reset Switch

Touch Screen Display

The device features a 5.7" QVGA transmissive LCD color display that is backlit for maximum viewability, then
covered with an industrial touch screen protector for maximum durability. The touch screen resolution is 903 x 1238
points per inch (PPI). For touch screen input, use your finger.

!

Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel
and will void the warranty.

Screen Protectors—Hand Held Products requires screen protectors to protect the touch screen; especially when
used with applications that require high-volume interfacing with the touch screen. Screen protectors help prevent
damage to the touch screen display and are easily installed.

Screen protectors can be purchased at any major computer retail store or directly from Hand Held Products (p/n
100000583). You can replace the touch screen protector; see

Screen Protector Replacement

Beeper

The internal beeper generates a tone for successful decoding.

Illumination Cone

Projecting downward from the front panel, the image engine cone houses the image engine. Slide the bar code
underneath this slot to scan a bar code or take an image. See

Scanning a Bar Code

Image Engine

The red illumination LEDs project out from the image engine at all times. For more information about imaging, see

«
...
11
12
13
14
15
...
»

Summary of Contents for Image Kiosk 8560









































































Reviews:

No comments