background image

Dolphin® 7850 Series User’s Guide–
Preliminary

Rev (b)

5/15/2007

3 - 5

Side Panel Features

Note: This graphic shows the right side of the Dolphin 7850 terminal.

Angled Touch Panel

The touch panel display (see page 

3-3)

 tilts up toward the user, which helps prevent glare and increases viewability 

in low-light conditions. Most important, the tilted display helps you read decoded data without having to tilt your wrist 
up repeatedly.

Beeper

The beeper sounds during decoding to indicate a good or bad scan. 

Image Engine Window

The image engine reads and decodes most popular bar code 
symbologies; see 

Supported Bar Code Symbologies

 on page 

5-2.

 

In addition, the engine captures images like a digital camera. 

The image engine points straight out the image engine window; 
simply point and scan. There are several image engine 
configurations available; for details on each, see 

Available Image 

Engines

 on page 

5-1.

Integrated Pistol-Grip

The pistol-grip handle is integrated into the terminal and is not removable, which makes the unit more durable in 
the field. The handle is also positioned so that the terminal is balanced in your hand for added comfort when using 
the unit over long periods of time. 

Scan 
Trigger

Stylus Slot

Integrated 
Pistol-Grip

Mechanical 
Connector

Image Engine 
Window

Angled Touch Panel

IrDA Port

Beeper

Rubber 
Bumpers

Fastener

Rubber 
Bumpers

Scan 
Trigger

Image 
Engine 
Window

 

(with 
engine)

Summary of Contents for Dolphin 7850 Series





































































































































Reviews: