manualshive.com logo in svg

HandHeld Dolphin 7850 Series, User Manual

Share
Download
HandHeld Dolphin 7850 Series User Manual Download Page 2

Disclaimer

Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information 
contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine 
whether any such changes have been made.  The information in this publication does not represent a commitment on the part 
of Hand Held Products.

Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or 
consequential damages resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.  All rights are reserved.  No part of this document 
may be photocopied, reproduced, or translated into another language without the prior written consent of Hand Held Products.

 

2007

 

Hand Held Products, Inc.

 

All rights reserved.

Web Address: 

www.handheld.com

Trademarks

Dolphin, Dolphin RF, HomeBase, Mobile Base, and QuadCharger are trademarks or registered trademarks of Hand Held 
Products, Inc.

Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME, Windows XP, ActiveSync, 
Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation.

Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and 
are the property of their respective owners.

Chapter 8 contains copyrighted information from Meetinghouse Corporation. Meetinghouse, the Meetinghouse logo, and all other 
Meetinghouse trademarks/service marks contained herein are trademarks or registered trademarks of Meetinghouse.

Summary of Contents for Dolphin 7850 Series





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands