Hand Held Products Quick Check PC600 User Manual Download

Page: 24 / 72

•

High intensity” red or green indicates the achieved grade

Right-click the “LED” area to select the minimum passing ISO/IEC

grade.

Format Parameters

•

Check Digit

•

Pass/Fail/Not Applicable Indicator (P, F, or N/A) and visual indicator
(red, green, gray)

Right-click the Check Digit “circle” to turn on or off optional check

digit validation (for Code 39, Interleaved 2-of-5, Codabar).Message
Length

•

Number of characters in the message

•

Pass/Fail Indicator (P or F) and visual indicator (red or green) for
message length check.

Right-click the Message Length display to select fixed or variable

messages.

Dimensional Parameters

•

Decodability (ISO/IEC)

•

Visual reference for pass/fail levels (red and green bars within
display window)

•

Measured parameter level (blue indicator within display window)

•

Measured parameter numeric value

•

Alphabetic grade A-F

•

Visual Pass/Fail indicator (Alphabetic Grade background displays
green or red)

•

Intercharacter Gap (ICG)

•

Displays ICG as a multiple of the X dimension

•

Pass/Fail indicator

•

Visual Pass/Fail indicator (Pass/Fail background displays green or
red)

•

Wide-to-Narrow Ratio (W/N Ratio)

•

Displays Wide-to-Narrow Ratio

•

Pass/Fail indicator

•

Visual Pass/Fail indicator (Pass/Fail background displays green or
red)

Right-click the W/N Ratio area to select the allowable ratio for the

following two-width symbologies

Summary of Contents for Quick Check PC600









































































Search results

Summary of Contents for Quick Check PC600

Reviews:

Related manuals for Quick Check PC600

Brands by name

Popular brands

Hand Held Products Quick Check PC600, User Manual

Search results

Summary of Contents for Quick Check PC600

Reviews:

Related manuals for Quick Check PC600

Brands by name

Popular brands