Hand Held Products Quick Check Bar Code Verifiers 800, User Manual

Page: 43 / 120

Quick Check® 600/800 Series User’s Guide 3 - 19
♦
To use a customized Command Code:
1. Scan the Command Code for the type of work you will be doing.
The settings stored in that Command Code are now set in your unit.
♦
To create a customized Command Code:
1. Connect the Quick Check 600/800 Verifier to a printer and turn on both units.
Refer to
Chapter 5, Saving and Printing for instructions on connecting the
unit and the printer. If you locked your unit by scanning a Locked Command
Code, you must scan an Unlocked Code before you can make any changes.
2. Make any settings changes on the unit that you want to save on your
Command Code. If you want to prevent others or yourself from making
accidental or intentional changes to the verifier settings, scan a locked Code.
(Remember, if you later decide to make changes, you must scan an
unlocked code.) Your Command Code begins printing.
3. Label your customized printed Command Code on the line provided with a
description of the code. You may also want to indicate if it is a Command- or
Code.
4. To improve the bar code quality, make a copy of it on an office copier.
Making a “reduced size” copy may also improve the quality.
5. If you want to change any of the settings, make sure your unit is unlocked,
and repeat steps 2 through 4.
♦
To request a Command Code from Hand Held Products:
You can have Hand Held Products create your customized Command Code by
mailing or faxing Hand Held Products a copy of the Customized Command Code
Selections List with all of the options you want on the Code indicated. Be sure
to keep the original list with your Command Code selections for your future
reference. Mail your completed list to the Hand Held Products’ office nearest you
(see
Chapter 14, Customer Support).