Hand Held Products Quick Check Bar Code Verifiers 800, User Manual

Page: 66 / 120

5 - 4 Quick Check® 600/800 Series User’s Guide
♦
To delete stored data:
1. Connect your printer to the verifier and turn on both units.
The opening display appears.
2. A PRINT BUFFER message appears asking if you want to continue, print or
clear.
3. Press
↓
and then
→
to move the cursor next to Clear.
4. Press SELECT .
The results stored in the verifier and the data from the last scan are deleted.
If you don’t want to clear the stored results, move the cursor next to Cont and
press
SELECT .
OR
1. Connect your printer to the verifier and turn on both units.
The opening display appears.
2. When you select the Print Results menu, a menu appears asking if you want
to print All Stored Results, the Latest Stored Results Only or Clear Buffer!.
3. Press
↓
to move to select Clear Buffer!.
4. Press SELECT .
The results stored in the verifier and the data from the last scan are deleted.
If you don’t want to clear the stored results, move the cursor next to Cont and
press
SELECT .
Interfacing With a Computer
You can use the QCViewerII software and print to a local or network printer, or
connect the verifier to an RS-232 serial communication device using the larger
port on the back of the unit and a QCDB09F cable. If you have the appropriate
computer software, you can display the verifier data on your computer. Contact
Hand Held Products for additional information about connecting the verifier to a
computer.
Reviewing the Printouts
All the information presented on the printout is also available on the display after
you scan a bar code symbol. Refer to
Chapter 4, Reviewing Scan Data for
information on displaying this data.