Hand Held Products IMAGETEAM 3870, System Manual

Page: 97 / 232

4 - 7
Once a line is selected, it is highlighted. A highlighted line can be horizontally
scrolled if there is data beyond the screen width. If the selected line is too wide
to fit on the display, an arrow appears at either the left or right edge of the display
indicating additional characters. To scroll horizontally toward the end of the line,
press
FN and then the UP arrow. The text scrolls to the left. To scroll horizontally
toward the beginning of the line, press FN and then the DOWN arrow. The text
scrolls to the right. (Press and release FN , and then press the arrow key.
Pressing and holding the arrow key causes horizontal scrolling to repeat.)
The most recent decoded message is stored in its entirety, up to 2710
characters. Older messages are truncated after 63 characters. A symbol (
)
appears at the point of truncation.
The History script makes use of the Font Size Preference (page 5-9).
Instead of selecting the Run History script from the display, you may scan the
following bar code.
Run Part Number and Quantity Factory Script
This script first prompts for PART # . You can either scan a bar code representing
the part number or type in the part number on the keypad. The part number may
be composed of any character. The part number will not be sent to the base until
after the quantity is entered.
You then will be prompted to enter a quantity; only digits are accepted. After
entering the quantity, the scanner concatenates the part number, a tab
character, and the quantity and transmits the combined message to the base.
This ensures that the scanner remains synchronized with the host, and that part
numbers and quantities from multiple scanners do not get intermingled.
Note: The data formatter may be used to substitute characters in place of the tab
and/or the carriage return.
If the scanner does not receive an acknowledgement from the base radio, the
application asks if you want to resend the information. You can respond
YES by
pressing the DOWN arrow. If you respond NO by pressing the UP arrow, the
message is discarded, and a transmission error is indicated. The application
repeats with another prompt for
PART # .
The Part/Quantity script makes use of the Font Size Preference (page 5-9) and
the Display Language Preference (page 5-10).
Run History Script