Hand Held Products IMAGETEAM 3870, System Manual

Page: 33 / 232

1 - 13
Beeper and LED Sequences and Meaning - ST5770
The ST5770 contains a beeper and two LEDs on the top of the unit (green and
yellow) to indicate its power up, communication, and charge pack status. The
tables below list the indication and meaning of the beeps and LED illumination
scanner.
ST5770 Scanner LED Indication
ST5770 Scanner Beep Indication
Sequence Meaning
Green LED on Trigger pulled, out of range
Green LED on, 2 seconds Successful decode and communication
Green LED blinks, 2 seconds
Successful decode with unsuccessful communication, or
unsuccessful clear to scanner
Green LED on, 2 seconds
Enter/exit programming mode, successful parameter
change in programming mode
Green LED blinks, 2 seconds Unsuccessful parameter change in programming mode
Yellow LED on Scanning, trigger pulled (in or out of range)
Yellow LED blinks Low battery (trigger pulled)
Sequence Meaning
No beep No scanning, scanning, or low battery (trigger pulled)
1 beep Successful decode and communication
Clicking, then1 beep Successful reassociation
Clicking only Unsuccessful reassociation
2 beeps, clicks, then1 beep Successful association to base
3 beeps - same pitch
Unsuccessful association to base (10th scanner), out of
range, or no network.
3 beeps - 2 high and 1 low
pitch
Enter/exit programming mode or successful association to
base. Successful or unsuccessful parameter change in pro-
gramming mode.
4 beeps - low, high, low,
high pitch
Communication error: Successful decode with possible
unsuccessful communication to base. Check host to deter-
mine if data arrived properly.