Hanbell RC2-AVI Series, Manual

Page: 41 / 42

40
8. Selection program
Selection program is available on Hanbell official website http://www.hanbell.com/index_eng.html
1. This program is suitable for the operating system of Windows 7 and above edition.
2. The monitor resolution shall be 1280 x720 or higher.
3. Double click the Hanbell Selection V5.0.4.exe file to start the setup.
4. Please follow the procedure and complete the installation.
Operating Procedure:
Step:
1. Before operating our selection software,
please check any upgrade of selection
software on Hanbell website.
2. There are
「
RC2
」
,
「
RE
」
,
「
LT
」
,
「
RG
」
,
「
LB
」
,
「
RT
」
product on the menu
3. For example, selecting
「
RE-A
」
compressor, will bring user to
next page of program. Then select Model and click
「
PERFORMANCE
」
button.
Following is a page to put into operation condition inputs,
key-in the following condition and then click the
「
「 「
「
Calculate
」
」 」
」
button.
- Refrigerant type
- Compressor model
- Power supply (default is 380V 3 50Hz)
- Evaporating SST (default is 5 ˚C)
- Condensing SCT ( default is 40 ˚C)
- Additional cooling method: oil cooler or liquid injection
- Partial load condition (%)
Click the
「 「 「 「
Calculate
」 」 」 」
button and it will show the
performance data in the middle of the window.
There are additional functions available:
「 「 「 「
Tables
」 」 」 」：
Calculate the polynomial coefficient
「
「 「
「
T.Data
」
」 」
」：
The technical data is the same with function key of technical data
「 「 「 「
Outline
」 」 」 」
: Pop-up the compressor outline selecting
「 「 「 「
Print
」 」 」 」：
Print out the calculated performance data
「 「 「 「
Output
」 」 」 」：
Save the calculated performance data as an file
「 「 「 「
Vi selection
」 」 」 」：
Manually select Vi value
(3.2.1) Click
「
「 「
「
Tables
」
」 」
」
button and double check the input
value to be calculated, then click calculate, coefficients will
will display on polynomial display. User can output or print out
the data.
In the
「
RC2-AVI
」
menu, we can select
「
SELECTION
」
to decide the most suitable compressor model.
Use will need to input the following operating conditions: