01-07-2022
15 / 74
AHP60 26/32 kW -
Installation, Use and Maintenance
2. DESCRIPTION OF THE EQUIPMENT
2.1. Designations and scope
TYNEHAM hot water production system for heating networks or thermodynamic domestic
hot water production system.
2.2. Packaging
Outdoor unit
Model
Code
TYNEHAM 26
AA090931
TYNEHAM
32
AA090934
TYNEHAM
26 AC
AA090932
TYNEHAM
32 AC
AA090935
Other accessories according to connection - see TYNEHAM Heat Pump Control manual, heating
application or DHW application.
The evaporator for the AC version is treated against corrosion. The heat pump's performance may be
affected by this by up to 2% in relation to the values communicated in chapter
2.4.1
2.3.
Definitions
Change to monobloc heat pump
: to be installed outdoors only for heating and/or domestic hot
water application .
air/water
: The outdoor air is the energysource. This energy is transmitted to the primary water
circuit by the heat pump.
inverter : The fan
and compressor speeds are modulated to suit the heat requirements which
allows the noise level to be reduced. This technology makes it possible to save energy by avoiding
high starting currents and by adjusting the power to the load.
COP (coefficient of performance)
: instantaneously, this is the ratio between the energy transmitted
to the heating circuit and the electrical energy consumed.
DHW
: Domestic hot water
CAUTION:
The minimum admissible temperature for the storage of the units is 5°C.