Hamworthy Purewell VariHeat 70c, Installation, Commissioning And Servicing Instructions

Page: 16 / 72

HAMWORTHY HEATING LTD
10
PUREWELL Vari
Heat c
500001169/T
Figure 4.5.2 – Boiler Condensate Connection
4.5 Condensate Connections

Provision must be made for removal of condensate from the boiler and flue system.

Condense is mildly acidic, typically pH 3 - pH 5.

Condense pipework must be non-corrosive and not copper. Hamworthy recommend
32mm dia. Plastic waste pipe.

Condense may be discharged to a standard drain subject to National or Local
regulations.
Boiler Condensate
Connection
(32mm o/d)
Figure 4.5.1 - Boiler Condensate Pipework Connection

Location of condense
pipework should prevent
freezing within
tundishes, traps and
pipework.

Do not allow blockage or
damage to the
condensate trap.

The connection to the
boiler condense drain
accepts a straight push-
fit coupling for 32mm i.d.
plastic waste pipe.