HAMWORTHY HEATING LTD
12
Merley Boiler Sequence Controller
500001210/D
2.5 Pre
-
assembled Wall Mounted Panel
Figure 2.6.1 Wall Mounted Panel fixings
Note: the panel is supplied with 4 wall fixing
brackets, which can be adapted to provide
various fixing options, of which the detail
shown in Figure 2.6.1 is representative.
IMPORTANT !
In connecting the cables to the RVS logic control
(
see 2.5 electrical connections and associated
tables
), please ensure that the mains voltage and
low voltage cables are run in separate ducts/
trunking, both within the panel and outside of the
panel.
Failure to observe this requirement will
compromise the operation of the control.
See note:
2.6 Operator Unit
-
Fitting into panel door
The display panel providing the user interface, MUST be panel mounted and connected to terminal X50 on the
RVS63.243 with the 1m ribbon cable supplied.
Please ensure that the location of the display in the panel door allows the door to hinge open.
With the aperture cut into the door panel, carefully fit the
‘
MERLEY
’
label to the panel before fitting the display.
Removal
23
58
Z
3
0
2
3
5
8
Z
3
1
23
58
Z
3
2
400
150
355
3
0
0
3
00
3
5
BRACKET FIXING
HOLES - 4 OFF
6 - 20mm CABLE
GLANDS SUPPLIED
LOOSE