4.4. Removing the cover panel
1. Remove the 2 screws securing the cover
2. Remove the top cover
4.5. Installing the Dorchester DR-SG
Dorchester DR-SG must not be installed on an inflammable surface (wooden floor,
inflammable floor covering, etc.).
Recommended distances relative to walls and ceiling:
Sufficient clearances must be provided to permit easy maintenance operations on the
boilers. The minimum clearance required is 500 mm around the boiler and 175 mm
above it.
These values cannot be substituted for the specific regulatory requirements.
The product must be levelled if required.
IMPORTANT:
The drilled holes on the base of the unit must not be used to mount
adjustable feet
4. Remove the front screen.
3. Unscrew the 2 retaining screws on each side of
the display:
Dorchester DR-SG XX-210 and XX-356 models have
a moveable screen that can be hung from the front
part of the Dorchester DR-SG to facilitate access to
the burner as well accessing the settings.
figure 3 - Screw positions for cover
dismount
figure 4 - Retracted screen
Page 26 / 104
00U07337760-A
DORCHESTER DR-SG -
Installation, Operation and Maintenance