9
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Hanging the Fan (continued)
Hanging the fan
□
Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
2
WARNING:
The hook as shown is only to balance the fan while
attaching wiring. Failure to hang as shown may result in hook
breaking, causing the fan to fall. The hook must pass from
inside to the outside of the canopy.
A
A
D
D
B
C
C
KK LL
MM JJ
MM
LL
KK
LL
MM
MM
NN
OO
A
B
Making the electrical connection
□
Connect the ground conductor of the 120-Volt supply (this may
be a bare wire or a wire with green colored insulation) to the
green ground lead(s) (JJ) of the fan. When using standard ceiling
mounting, there are two green grounding leads; one from the
slide-on mounting bracket (A) and one from the ball/downrod
assembly (B). When using close to ceiling mounting, there is
only one green grounding lead from the slide-on mounting
bracket (A) since the ball/downrod assembly (B) is not used.
□
Connect the fan motor white wire (MM) to the supply white
(neutral) wire (MM) using a wire connecting nut (BB).
□
Connect the fan light supply (blue) wire (KK) and the fan motor
black wire (LL) to the supply black (hot) wire (LL) using a wire
connecting nut (BB).
□
After connecting the wires, spread them apart so that the green
(JJ) and white wires (MM) are one side of the outlet box (NN)
and the black wire (LL) is on the other side.
□
Turn the wire connecting nuts (BB) upward, and carefully push
the wiring into the outlet box (NN).
3
IMPORTANT:
Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING:
Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
