11
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Attaching the Fan Blades (continued)
Assembly - Attaching the Light kit
Attaching the light kit
Attaching the glass shades
Attaching the fan blade assembly
to motor
1
2
2
□
Remove the three screws (QQ) from the black bracket below
the fan motor assembly (D).
□
Connect the wires from the light kit fitter assembly (E) to the
wires from the black bracket below the fan motor assembly
(D) by connecting the molded adaptor plugs (SS) together.
Carefully tuck all wires and splices in the switch cup of light
kit fitter assembly (E).
□
Position the light kit fitter assembly (E) on the black bracket
below the fan motor assembly (D) and align the three holes
in the black bracket.
□
Re-install the three screws (QQ) removed in the the first
step to secure the light kit fitter assembly (E).
□
Remove the compressing ring (Q) by turning it counter-
clockwise.
□
Insert the glass shade (I) into the glass holder of the light
kit fitter assembly (E) and re-install the compressing ring
(Q) by turning it clockwise to tighten the glass shade (I).
□
Repeat these steps for the remaining glass shades (I).
□
Attach the pull chain (HH) provided to the light pull chain
and the fan pull chain.
□
Fasten the blade assembly (H) to the motor (D) by inserting
the alignment post into the slot on the bottom of the motor
(D) and tighten the motor screws. Please note that the motor
screws are pre-attached into the blade bracket.
H
D
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
CAUTION:
Make sure the power is off before attaching or
removing the glass shades.
WARNING
: Allow the glass shade to cool completely before
removing.
G
E
D
SS
I
Q
HH
HH
E
