Attaching the Fan
Blades
Step 1
Attach the blades to the blade arms using
the screws and rubber washers provided as
shown in Figure 14. Start a screw into the
,
but do not tighten. Repeat for the other 2 screws
and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
Step
3
Fasten the blade assemblies to the motor
by insert the tab from the blade
s to the slot
in the bottom motor housing, then tighten the
two screws and washers already installed in the
blade
s (Figure 15).
Step 4
Install an optional light kit if you wish.
Follow the instructions included with the kit.
arm
arm
arm
8.
Rubber
washer
Blade
arm
Figure 14
Motor
Blade arm
Slot
Tab
Figure 15
Blade
