9.
Mounting plate
Screws
Switch
housing
Mounting ring
Screws
Switch
housing
Figure 17
Figure 18
Installing the Switch
Housing and Mounting
Plate
While holding the
under
your fan, snap together the wire connection
plugs .
Step 1.
Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2.
switch housing
Step 3.
Place the key holes on the switch
housing over the 2 screws previously loosened
from the mounting ring, turn switch housing
until it locks in place at the narrow section of the
key holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 17)
Step 4.
Carefully push all wires back into the
switch housing, then install the mounting plate
onto the switch housing with 3 screws provided.
Be sure to tighten all screws. (Fig. 18)
