8.
Attaching the Fan Blades
Step 1
Attach blades to blade arms using three
screws with rubber washers.(Fig. 15) Start a
screw into the blade arm, do not tighten. Repeat
for the 2 remaining screws and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade is
straight. Repeat steps for the remaining blades.
Step 3
(Fig. 16)
Fasten the blade assemblies to the motor
housing by lining up the slots of the blade arms
with the tabs on the motor housing
, then tighten
the two screws and washers already installed in
the blade arms.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Rubber packing
mounts
Screws
Figure 15
Figure 14
Figure 16
CAUTION:
Remove 5 rubber packing
mounts from fan motor assembly and discard
before installation. (Fig. 14)
Motor
Blade arm
Slot
Tab
Blade
arm
Blade
Screws
with rubber
washer
