Mounting plate
Light kit
Wire connection
plugs
Bulb
Glass shade
Screws
NOTE
: Before starting installation, disconnect the power by turning off the circuit
breaker or removing the fuse at fuse box.
Turning power off using the fan switch is not sufficient to prevent electric shock.
1. Raise and hold the light kit close to the mounting plate and proceed to do the wire
connections. Connect the white wire connectors from the light kit and fan, follow the
same procedure with the blue and black wire connectors. (Fig. 19)
2. Carefully push all wires back into the mounting plate, then install the light kit onto
the mounting plate with 3 screws provided. Be sure to tighten all screws. (Fig. 19)
3. Install
13 Watt compact fluorescent bulb
(included).
NOTE:
CFL bulbs are NOT dimable.
4. Raise glass shade up against the light kit and secure it to fan by turning glass
clockwise until snug.
DO NOT OVERTIGHTEN.
(Fig. 19)
5. Restore power and your light kit is ready for operation.
Figure 19
NOTE:
Light bulbs have no warranty; can be purchased at any Home Depot store.
Installing the Light Kit 10.
