1. Before you begin installing the fan, shut power off at the
circuit breaker of the fuse box.
2. Be cautious! Read all instructions and safety information
before installing your new fan. Review accompanying
assembly diagrams.
3. Make sure that all electrical connections comply with
local codes, ordinances, or National Electrical Codes.
Hire a qualified electrician or consult a do-it-yourself
wiring handbook if you are unfamiliar with installing
electrical wiring.
4. Make sure the installation site you choose allows the fan
blades to rotate without any obstructions. Allow a
minimum clearance of 7 feet from the floor and 18 inches
from the tip of the blades to the wall.
5. If you are mounting the fan to a ceiling fan outlet box, use
a U.L. Listed metal octagonal outlet box marked
"Acceptable for Fan Support". Secure the box directly to
the building structure. The outlet box and its support must
be able to support the moving weight of the fan (at least 50
pounds) Do not use a plastic box
6. Caution: To reduce the risk of injury use only the screws
provided with the outlet box in conjunction with the lock
washers provided with the fan.
7. If you are mounting the fan to a joist, make sure it is able
to support the moving weight of the fan (at least 50 pounds).
1. Safety Rules
8. After you install the fan, make sure that all mounting components
are secured to prevent the fan from falling.
9. Do not insert anything into the fan blades while the fan is
operating.
10. Turn the fan off and wait for the blades to stop completely before
changing the fan direction.
NOTE:
The important safeguards and instructions appearing in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care are factors which can not be built into this product. These factors
must be supplied by the person (s) installing, caring for and operating
the unit.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL
INJURY, MOUNT FAN UNLY TO A U.L. LISTED OUTLET BOX OR SUPPORTING
SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX OR IN CONJUCTION WITH THE
LOCK WASHERS PROVIDED WITH THE FAN. MOST OUTLET BOXES
COMMONLY USED FOR FAN SUPPORT OF LIGHTING FIXTURES ARE NOT
ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE REPLACED. CONSULT A
QUALIFIED ELECTRICIAN IF IN DOUBT.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE
HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING
THE FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN
BLADES.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS
WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
WARNING
NOTE
READ AND SAVE ALL INSTRUCTIONS!
