□
Install the three 40W candelabra bulbs (KK) (included).
□
Pass the two pull chains (LL) on the switch housing (I)
through the chain holders located on the switch
housing (I), and attach the fobs to the pull chains (LL).
□
Raise the glass shade (K) up against the light kit (J)
and secure it to the fan by turning the glass shade (K)
counterclockwise until snug. DO NOT OVERTIGHTEN.
□
Restore power and your light kit is ready for opera-
tion.
14
Finishing the light kit and
attaching the glass shade
K
I
KK
LL
LL
J
14
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit (continued)
