Turn on the power and check the operation of
your fan. There are two pull chains available in
your fan:
1. 3-speed pull chain- it controls the fan speed as
follows: 1 pull- High, 2 pulls- Medium, 3
pulls- Low, and 4 pulls- Off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
2. Light kit pull chain- it controls the light kit in
"ON" or "OFF".
The slide switch controls directions: forward
(switch down ) or reverse (switch up ).
Warm weather - (Forward) A downward air flow
creates a cooling effect as shown in Figure 21.
This allows you to set your air conditioner on a
higher setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown in
Figure 22. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
NOTE
WAIT FOR FAN TO STOP BEFORE
CHANGING THE SETTING OF THE
SLIDE SWITCH.
11. Operating Your Fan
Fan Without Light Kit
Your fan is designed with light kit, we also
prepare a switch housing cover for your
choice in case you intend to install the fan
without light kit.
(Optional)
Attach the switch housing
cover to the switch housing with the screws
provided. ( Fig. 20)
Screws
Switch housing
Switch
housing
cover
Figure 20
Figure 21
Figure 22
