7.
Finishing the
Installation
STANDARD CEILING INSTALLATION
Slide
canopy up to the ceiling as shown in
Figure 13 leaving a 1/8" clearance between
the canopy and the ceiling. Make sure you
place the wires safely into
outlet box.
Secure the canopy to the hanger bracket with
the four screws with your fan. Slide the
canopy ring over the canopy and tighten by
turning the ring.
CLOSE-TO-CEILING INSTALLATION
Remove the fan from the tab on the hanger
bracket. Secure the canopy to the hanger
bracket as shown in Figure 14 with four
screws included with your fan. Slide the
canopy ring over the canopy and tighten by
turning the ring.
the
the
WARNING
Make sure the notch on the hanging bracket
properly sits in the groove in the hanger ball
before attaching the canopy to the bracket by
turning the housing until it drops into place.
Figure 12
Safety Cable
Outlet box
Hanger
bracket
Installation of Safety
Support
A
n additional safety support is provided to
prevent the fan from falling. Secure the safety
cable to the ceiling joist with screw and washer,
as illustrated in Figure 12.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
Figure 11
Diagram indicates optional light kit wiring.
Light
Fan
WHITE
BLUE
BLACK
WHITE
