8.
Rubber
washer
Blade
arm
Figure 15
Blade
Screws
Figure 16
Motor
Blade arm
Slot
Tab
Figure 13
Figure 14
Allow 1/8"
Clearance
Allow 1/8"
Clearance
Remove the blade attachment screws from
the fan motor assembly. Attach and adjust
fan blades according to the instructions in
the following section.
Attaching the Fan
Blades
Step 1
Attach blades to blade arms using three
screws and rubber washers as shown in Figure
15. Start a screw into the bracket, do not tighten.
Repeat for the 2 remaining screws and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
Step 3
Fasten the blade arms to the motor by
inserting the tab from the blade arms to the slot
in the bottom motor housing, then tighten the
two screws and washers already installed in the
blade arms (Figure 16).
Step 4
Install an optional light kit if you wish.
Follow the instructions included with the kit.
