C
F
A
4
Installing the mounting bracket
to the electrical box
Hanging the fan to the mounting
bracket
5
Assembly — Hanging the Fan
A
□
Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□
Attach the mounting bracket (A) on the outlet box by
sliding the mounting bracket (A) over the screws
provided with the outlet box. Note that the flat side of
the mounting bracket (A) is toward the outlet box.
□
Securely tighten the two mounting screws.
□
Carefully lift the fan motor assembly (F) up to the
mounting bracket (A) and seat the hanger ball/down-
rod assembly (C) in the mounting bracket (A) socket.
Make sure the tab on the mounting bracket (A)
socket is properly seated in the groove in the hanger
ball/downrod assembly (C). This will help to balance
the ceiling fan.
WARNING:
To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
WARNING:
The tab in the ring must rest in the groove of
the hanger ball/downrod assembly (C). Failure to properly
seat the tab in the groove could cause damage to the
wiring.
10
