3
Assembling the fan
WARNING:
Failure to properly install the cotter pin (NN)
could result in the fan loosening and possibly falling.
Assembly
(continued)
F
SS
BB
E
TT
B
RR
VV
D
OO
NN
PP
PP
NOTE:
Misting Fan should be installed with the included
downrod only and is not compatible with other downrods due
to the misting feature.
□
Carefully feed the water tube (UU) attached to the
misting ring (E) into the side hole of the downrod (VV)
and through the top. Guide the motor wires up
through the bottom hole of the downrod and the
misting ring. Insert the downrod into the collar.
□
Align the holes on the downrod bottom and collar
then insert the clevis pin (OO) through all holes of the
downrod and collar, be careful not to jam any wires
or tubes inside the downrod. Restore the cotter pin
(NN) to the end of the clevis pin (OO), make sure it
snaps into the lock position then tighten the two
collar setscrews (PP).
□
Secure and tighten the misting ring (E) onto the
motor with two mounting screws (BB) and ensure all
screws
are
tightened.
□
Slip the misting ring cover (D) and canopy (B) onto
the downrod (VV).
□
Carefully reinstall the hanger ball (RR) onto the
downrod (VV) and reinstall the ground lead (TT) onto
the downrod (RR), being sure that the cross pin (SS)
is in the correct position, the setscrew (QQ) is
tightened and wires are not twisted.
9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
E
B
UU
VV
D
