G
CC
TT
J
XX
SS
□
Remove the plastic nut (UU), glass cap (VV) and
decorative nut (WW) from the light kit (K).
□
Install two 9 watt LED bulbs (BB) (included).
□
Place the glass shade (L) over the light kit (K) stem
and secure with the plastic nut (UU) (rubber side on
the top). Do not overtighten.
□
Insert the two pull chains (DD) through the eyelet in
the glass shade (L) and glass cap (VV). Secure the
glass cap (VV) and decorative nut (WW) previously
removed. Do not overtighten.
□
Disassemble the switch housing (XX) from the light kit
(K). You can keep the light kit (K) for future use.
□
While holding the switch housing (XX) under the fan,
snap together the wire connection plugs (SS).
□
Attach the plastic plug (CC) to the switch housing
(XX).
□
Install the switch housing (XX) to the light kit
mounting plate (J) with light kit mounting screws (TT)
provided.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit (continued)
13
Installing the light bulbs
and glass shade
14
Installing the fan without the
light kit (optional)
VV
UU
WW
DD
L
DD
K
G
BB
18
