HAMOKI B10, Instruction Manual, Page: 9 / 19

9
TO REMOVE THE CAGE ASSEMBLY
• Ensure that the bowl support is in the lowered position (photograph 1 ). Remove the
agitator and bowl first
When the cage assembly is in the closed position, a stop will prevent it from
rotating in an anticlockwise direction.
Loosen the screw. Once done, you can then remove the cage.
TO REMOVE THE REAR SPLASH SHIELD:
The rear splash shield should by regularly inspected and cleaned when necessary. This
should be performed by a suitably trained supervisor or maintenance department at
least once a month. The splash shield can be either cleaned in either a bowl of hot soapy
water or a dishwasher.
• Ensure that the bowl is in the down position. Remove the bowl, guard cage and agitator
as described previously.
• Using a suitable bladed screwdriver, remove the 3 retaining screws securing the drip
cup to the mixer. NOTE: ensure that you have a firm grip on the shield whilst removing the
screws.
• The drip cup can be carefully lowered away from the machine. Take care not to
damage the paintwork of the mixer.
• Wipe any signs of grease from the drip cup first before washing.
• Refit the rear splash shield in reverse order once done, ensuring the screws are securely
tightened.